MTI AUTOFRY Mini-C, Руководство оператора

Страница: 14 / 32

AutoFry
Mini- C Operator’s Manual
12
Mini-C OM 11/18 63-0114
Cooking with AutoFry is as simple as
1-2-3
1.
Enter a cook time by pressing buttons 0-9 on the keypad.
To cook for 2 minutes and 30 seconds:
press 2, 3 and 0.
The display will read 02:30. If you enter the wrong time,
press CLEAR and re-enter your cook time. Most food
products will have recommended cook times printed on
their packaging. Use those times as a starting point.
2.
Open the food entry door and place the food in the food
chute.
3.
Close the food chute to drop the food into the cook basket
and press START.
To cancel a cook cycle, press CLEAR. You will be prompted
to press CLEAR again to confirm. Note that this will cause a
dump cycle to occur.
▪
WAIT…COOKING will be displayed. The basket
containing the food will automatically lower into the oil
and the cook time will begin to count down.
If you have Comp set to YES you may notice the time on
the display slow down. The cooking logic built into the
AutoFry compensates for the drop in oil temperature so
your product comes out perfect every time.
▪
At the end of the cook cycle the basket will raise out of
the oil and drain for 12 seconds. WAIT… will be
displayed.
▪
At the end of the drain cycle the basket will dispense
the food down the exit chute. You will hear the basket
hitting the side wall. The dispense cycle is repeated to
ensure all the food is emptied from the basket.
▪
The basket will return to the ready position; the display
will show READY and 4 quick beeps will signal the
AutoFry is ready for the next order.
Begin Cooking
During Cooking
Note:
Do NOT open the front entry
chute after the timer counts
down. The basket could be in
motion and damage to the basket
motor will result.
The food chute should only be
opened when the display shows
READY; or when the timer is still
counting down.