background image

O-27 OPERATION

  While the RailKing Dash-8 diesel is more than capable of operating on
O-27 curves and switches, you may find that certain light freight cars are
prone to derailing when being pulled or pushed by the RailKing Dash-8
through O-27 switches.  Should this occur, we suggest adding weight to the
cars making them heavier and less likely to derail.  In addition, the 6-wheel
version may rub the switch box.

SERVICE & WARRANTY INFORMATION

HOW TO GET SERVICE UNDER THE TERMS OF THE 
LIMITED ONE YEAR WARRANTY

  For warranty repair, do not return your product to the place of purchase unless it was
purchased from Mike’s Train House in Columbia, MD.  Instead, follow the instructions below
to obtain warranty service as our dealer network is not prepared to service the product under
the terms of this warranty.

1.  First, write, call or FAX MTH Electric Trains, 7020 Columbia Gateway Drive, Columbia,
MD  21046, 410-381-2580 (FAX No. 410-381-6122), stating when it was purchased and what
seems to be the problem.  You will be given a return authorization number to assure that your
merchandise will be properly handled upon its receipt.

2.  CAUTION:  Make sure the product is packed in its original factory packaging including its
foam and plastic wrapping material so as to prevent damage to the merchandise.  The shipment 
must be prepaid and we recommend that it be insured. 

A cover letter, including your name,

address, daytime phone number, Return Authorization number and a full description of the
problem, must be included to facilitate the repairs.  Please include the description regardless
of whether you discussed the problem with one of our service technicians when contacting
MTH for your Return Authorization number.

3.  Please make sure you have followed the instructions carefully before returning any
merchandise for service.

LIMITED ONE YEAR WARRANTY

  This item is warranted for one year from the date of purchase against defects in material or
workmanship.  We will repair or replace (at our option) the defective part without charge for
parts or labor, if the item is returned to the address below within one year of the original date
of purchase.  This warranty does not cover items that have been abused or damaged by careless 
handling.  Transportation costs incurred by the customer are not covered under this warranty.

  This warranty gives you specific legal rights and you may have other rights which vary from

state to state.

ProtoSounds® is a trademark of MTH Electric Trains.  DCRU® is a registered copyright of
QS Industries, Inc.  Lionel® and Railsound® are registered trademarks of Lionel L.L.C.

Содержание RAILKING DASH-8





































Отзывы: