Parts: Pier (8 in 1 Size), Pier Base (8)
Assembly
:
1. Slide Pier Into Pier Base making sure that the pier snaps
into position over the tabs on the pier base. Note: Use of
the pier base is optional but recommended when track is set
up directly on the floor or on carpeting.
2. Slide the Lionel FasTrack into the track holders.
Positioning of the piers at the track joints is recommended to
prevent sagging of track sections between piers.
and Use with Lionel FasTrack
®
®
®
®
To Use Trestle Set with O Gauge Tubular Track:
• Lay the tubular track on the clips, lining up the mounting
holes on the track and on the clips.
• Using #4 x ½" (3/8” for O-27) oval head Phillips screws,
mount the track to the clips on each pier by screwing the
screws through the track mounting holes.
Piers (x8)
Pier Base
x8
Line up Holes
on Tubular Track
Screw Track
to Base of Pier
Take care not to over-tighten the
track to the pier as it will cause
bowing and not allow the track clip
to seat properly.
®
®
Lionel and FasTrack are registered trademarks of Lionel Trains L.L.C.
