MTHTrains Premier P5-a страница 19 Скачать руководство пользователя | Manualshive

Страница: 19 / 24

background image

19

Premier P5-a Electric Engine

Additional Features Accessible with the DCS Remote
Control System:

While conventional mode operation of a Proto-Sound 2.0 engine yields
wonderfully realistic sound and several train control features, command mode
operation allows the user to access a world of command functions never before
accessible to O Gauge railroaders. With the addition of the DCS Remote
Control System (including a DCS remote handheld and Track Interface Unit)
users gain many advanced features, including:

• DCS Proto-Speed Control - Establishes desired locomotive speed in scale
miles per hour increments via a thumbwheel control and allows operator to set
maximum speed and acceleration/deceleration rates

• ProtoSmoke

®

Variable Output Control - Controls how much smoke each

engine outputs and matches smoke to locomotive speed

• Locomotive Lighting Control - Controls locomotive headlights, marker and
interior lights, beacon lights, ditch lights, and MARS lights

• Emergency Stop-Single button push stops all Proto-Sound 2.0 trains but does
not turn off the power

• One Touch Global Mute/UnMute-Single button mutes or unmutes all
DCS-controlled locomotives’ user-defined actions, including sound, lights, and
smoke

• Proto-Dispatch Operation-Public Address-like feature allows users to speak
through locomotive speaker during operation

• Proto-Cast-Allows users to play audio recordings through locomotive speaker
during operation

• Proto-Doppler Sound Effects Set Up-Users can configure locomotive for
Doppler Operation, including setting distance points for Doppler start, repeat,
and stop modes

• Independent Volume Control of Engine Sounds, Bell, Horn & Whistle for
each Locomotive

• Control up to 50 different DCS-Equipped Locomotives at one time with
multiple TIUs

«
...
17
18
19
20
21
...
»

Содержание Premier P5-a

























Отзывы:

Нет отзывов

Похожие инструкции для Premier P5-a

Бренд: WattAge Страницы: 32

Mickey Mouse Cafe

Бренд: VTech Страницы: 20

Baldwin 4-4-0 1:20.3 Scale

Бренд: Accucraft trains Страницы: 9

Бренд: Carson Страницы: 26

Бренд: Old School Model Works Страницы: 22

Бренд: Joustra Страницы: 16

Бренд: PIKO Страницы: 12

WILD THING 74180

Бренд: Fisher-Price Страницы: 28

Бренд: BLOTZ Страницы: 2

Бренд: Opitec Страницы: 11

Бренд: Smoby Страницы: 4

Бренд: GRAUPNER Страницы: 12

Бренд: Fisher-Price Страницы: 2

Бренд: Horizon Hobby Страницы: 17

Albatross D.III

Бренд: Dancing Wings Hobby Страницы: 4

Wireless Plus Set Duo 20010109

Бренд: Carerra Страницы: 52

mini Titan E325

Бренд: THUNDER TIGER Страницы: 2

Splash-n-Scrub Sink

Бренд: B.toys Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды