Set Up
Adding Steps
For a more realistic look we have provided extra steps for the baggage car.
However please be aware that the car will not run on smaller radius curve if you
apply these steps.
To apply the steps simply screw the steps into the locations below using the screws
provided.
Screw holes for adding steps
Screw holes for adding steps
Extra Step
Premier French SNCF Passenger Car
2
Cotter Pin
Washer
Set Up for O-42 Radius
a smaller radius curve (O-42). To
operate on a smaller radius curve follow the instructions below. Please note that if
you choose to run on O-42 radius the cars will only run forward. You will not be
able to run in reverse.
First remove the 2 pilot mounting screws to lower the pilot. Then remove the
cotter pin and remove the spring from the coupler. Next apply the washer and
reattach the coupler with a new cotter pin.
The Premier French SNCF Passenger Cars come set up to operate on O-84 radius
curve track. However you may wish to operate on
Cotter Pin
Spring
