Set Up - Truck
1) First unscrew one of the screws on
top of the truck bolster and remove
the truck side and wheel sets.
2) Next add the two cross beams to the ends of the truck sides and
reassemble the truck. Please note that the bend in the cross beam
should face downward.
Cross Beams
Premier European
4
Freight Cars
Depending on which freight car that you purchased, your car may
come with additional parts that may be added to the trucks for a
more prototypical look. Please be aware that these parts can only be
added when operating the cars with the European fine scale couplers.
To install the additional truck parts please follow the instructions
below.
3) Now insert the 4 brake shoe rods into the small holes on the truck
sides. You will need to bend them slightly and let them slip into the
holes on the other truck side.