MTF JC-307A, Инструкция по эксплуатации

Страница: 36 / 50

36/50
b) Release the snap of the narrow part (Fig. 6), pull the part out from the set and put it aside.
c) Put up the ladder and open it as step-ladder to maximum possible extent (the straps are
stretched, Fig. 8).
Fig. 7
Fig. 8
Fig. 9
3.3 One-sided climbing ladders, “steps” (Fig. 9)
These are one-sided climbing step-ladders designated for home use. They can be used on levelled
and solid floors (not in the gardens in soft terrain).
The process for working with this type of ladder:
a) Remove the packaging.
b) Put up the steps and open them in the maximum possible extent (the strings are stretched,
Fig.8),
c) In the final stage, the platform with incisions must snap tight in the upper tube of the
supporting part. When folding the steps, it is necessary to first lift up the platform in the back, and
then fold the steps.
d) Do not step on the tube or the profile of the supporting part of one-sided steps (Fig. 9).
e) Check the condition of strings carefully, as they are the safety measure preventing excessive
opening (Fig. 8).
4. Taking care of the ladders
Always be careful to avoid stones, mortar or sand getting in the joints!
A
B
C
Strap
Rising
line
Supporting
part