background image

4

your footing, release the blade control handle 
immediately and the blade will stop rotating within 
three seconds.

9.

Mow in daylight or good artificial light; walk, not run.

10. Stop the blade when crossing gravel drives, 

walkways or roads.

11. If the equipment should start to vibrate abnormally, 

stop the engine and check immediately for the 
cause. Vibration is generally a warning of trouble.

12. Shut the engine off and wait until the blade comes 

to a complete stop before removing the grass 
catcher or unclogging the chute. The cutting blade 
continues to rotate for a few seconds after the 
engine is shut off. Never place any part of the body 
in the blade area until you are sure the blade has 
stopped rotating.

13. Never operate mower without proper trail shield, 

discharge cover, grass catcher, blade control 
handle or other safety protective devices in place 
and working. Never operate mower with damaged 
safety devices. Failure to do so can result in 
personal injury.

14. Muffler and engine become hot and can cause a 

burn. Do not touch.

15. Only use parts and accessories made by the 

original equipment manufacturer (O.E.M). Failure 
to do so can result in personal injury.

16. If situations occur which are not covered in this 

manual, use care and good judgment. Contact your 
dealer for assistance. Call1-800-949-4483 for the 
name of your nearest dealer.

Slope Operation

Slopes are a major factor related to slip and fall 
accidents which can result in severe injury. Operation 
on slopes requires extra caution. If you feel uneasy on a 
slope, do not mow it. Before operating this unit on a 
slope or hilly area, use the slope gauge on page 6 to 
measure slopes. If the slope is greater than 15 degrees, 
do not mow it.

Do:

1.

Mow across the face of slopes; never up and down. 
Exercise caution when changing direction.

2.

Watch for holes, ruts, rocks, hidden objects, or 
bumps which can cause you to slip or trip. Tall 
grass can hide obstacles.

3.

Always be sure of your footing. A slip and fall can 
cause serious personal injury. If you feel you are 
losing your balance, release the blade control 
handle immediately, and the blade will stop rotating 
within 3 seconds.

Do Not:

1.

Do not mow near drop-offs, ditches or 
embankments, you could lose your footing or 
balance.

2.

Do not mow slopes greater than 15 degrees as 
shown on the slope gauge.

3.

Do not mow on wet grass. Unstable footing could 
cause slipping.

Children

Tragic accidents can occur if the operator is not alert to 
the presence of children. Children are often attracted to 
the mower and the mowing activity. They do not 
understand the dangers. Never assume that children 
will remain where you last saw them.

1.

Keep children out of the mowing area and under 
the watchful care of a responsible adult other than 
the operator.

2.

Be alert and turn mower off if a child enters the 
area.

3.

Before and while moving backwards, look behind 
and down for small children.

4.

Use extreme care when approaching blind corners, 
doorways, shrubs, trees, or other objects that may 
obscure your vision of a child who may run into the 
mower.

5.

Keep children away from hot or running engines. 
They can suffer burns from a hot muffler. 

6.

Never allow children under 14 years old to operate 
a power mower. Children 14 years old and over 
should read and understand the operation 
instructions and safety rules in this manual and 
should be trained and supervised by a parent.

Service

Safe Handling of Gasoline:

1.

To avoid personal injury or property damage use 
extreme care in handling gasoline. Gasoline is 
extremely flammable and the vapors are explosive. 
Serious personal injury can occur when gasoline is 
spilled on yourself or your clothes which can ignite. 

2.

Wash your skin and change clothes immediately.

3.

Use only an approved gasoline container.

4.

Never fill containers inside a vehicle or on a truck or 
trailer bed with a plastic liner. Always place 
containers on the ground away from your vehicle 
before filling.

5.

If possible, remove gas-powered equipment from 
the truck or trailer and refuel it on the ground. If this 
is not possible, then refuel such equipment on a 
trailer with a portable container, rather than from a 
gasoline dispenser nozzle.

6.

Keep the nozzle in contact with the rim of the fuel 
tank or container opening at all times until fueling is 
complete. Do not use a nozzle lock-open device.

7.

Extinguish all cigarettes, cigars, pipes and other 
sources of ignition.

8.

Never fuel machine indoors because flammable 
vapors will accumulate in the area.

Содержание White Outdoor 12A-465E790





















Отзывы: