5
SECTION 5: CONTENTS OF CARTON
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents
are listed below and shown in Figure 3. Part numbers are shown in parentheses.
•
One Auger Housing Assembly w/ Lift Linkage
•
One Undercarriage Assembly (packaged
separately w/ Upper V-belt 754-0371A)
•
One Chute Directional Support w/ Tilt Lever
•
One Lift Handle Assembly
•
One Upper Chute Crank Rod
•
Two Self-adhesive Reflectors (730-3000)
•
Four Cable Ties (725-0157)
•
Two Spare Shear Bolts (710-0890A)
& Hex Lock Nuts (712-0429)
•
One Upper V-belt (754-0481)
•
One Lower V-belt (754-0125A)
Figure 3
Chute Directional
Support w/ Tilt Lever
Undercarriage Ass’y w/ Upper V-belt
Auger Housing Assembly
Lift Handle
Self-adhesive
Cable Ties
Upper V-belt (754-0481)
Lower V-belt
for manual PTO tractors
(754-0371A) for electric PTO tractors
NOTE:
Two upper drive belts are included with your snow thrower attachment. The belt (754-0371A) packaged with the under-
carriage assembly in the separate box is for use on tractor’s equipped with an electric PTO. The other upper drive belt
(754-0481) is for use on tractor’s with a manual PTO. Belt part numbers are stamped on the outer edge of the belts.
Spare Shear Bolts
& Hex Lock Nuts
{
Reflectors
(Cable end
attached to
lift index rod
on auger
Assembly
Upper Chute Crank Rod
housing ass’y)
with Lift Linkage
