MTD GT40, Оригинальная инструкция по эксплуатации

Страница: 23 / 120

Troubleshooting
23
EN
Troubleshooting
WARNING!
Risk of injuries or material damage
¾
In case of doubt always consult a specialist workshop.
¾
Before any inspection or any work on the device, switch off the motor and remove the power
pack.
Problem Possible cause Remedy
The device switch-
es off.
The power pack is too hot. Allow the power pack to cool.
The power pack is discharged. Charge the power pack.
The temperature of the device (electronics)
is too high.
Allow the device to cool and if necessary,
clean the ventilation slots
Overcurrent release If this occurs again take your device to a
specialist workshop.
The device will not
switch on.
The power pack is discharged. Charge the power pack.
Overcurrent release If this occurs again take your device to a
specialist workshop.
Power pack temperature too high or too low. Allow the power pack to cool down or heat
up.
The power pack is defective. Replace the power pack.
Automatic line
adjustment does
not work.
The spool is empty. Replace the line spool.
The toothing between the metal knob and the
line spool is dirty.
Use a brush to remove dirt from the parts.
The line has torn off and is pulled into the
line spool.
The line has become caught in the spool.
Take off the line spool, if necessary rewind
the line by gently pulling and insert the spool.
The line is welded onto the spool. Remove the welded line part, if necessary
rewind the line by gently pulling and insert
the spool.
The line breaks off
too frequently.
The line comes into contact too frequently
with fixed objects, e.g. fences, trees, etc.
Use the plant protection bow.
Strong vibrations Device fasteners have come loose. Consult a specialist workshop.
Warranty
The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactur-
ing defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.
CE Declaration of Conformity
Further details about the device are con-
tained on the separately enclosed CE
Declaration of Conformity, which forms part
of this instruction manual.
Environmentally-friendly disposal
Electrical tools, accessories and packaging must be
routed into an environmentally compatible recycling
chain.
Power packs/batteries:
Do not dispose of power packs/batteries
in domestic waste, by burning or throwing
into water. Power packs/batteries must be
collected, recycled or disposed of in an
environmentally friendly manner.
Power tools:
Do not throw your power tool away with
domestic waste! Take it to a disposal
facility.