MTD compact log splitter Скачать руководство пользователя страница 16

Warranty Conditions  — Australia  (Not applicable to other Regions)

The benefits given to you under this warranty are in addition to other rights and remedies that you have under 

Australian law in relation to the goods.
MTD Products Australia Pty Ltd warrants that this machine is free from defects in material and workmanship. This 

warranty is limited to repairing or replacing any part which appears upon inspection by MTD Products Australia Pty 

Ltd or its agent to be defective in material or workmanship.
A separate warranty is provided in respect of the engine for this machine. Refer to the engine warranty statement in 

the Engine Owner’s Manual which has been included with this machine.
For domestic use, this warranty will apply for a period of 2 years from date of purchase. Warranty for commercial 

or industrial use is 90 days from the date of purchase. In the event of dispute, MTD Products Australia Pty Ltd will 

determine whether the machine was used for domestic, or commercial or industrial use.
All costs associated with claiming under this warranty must be borne by you, including transport costs incurred in 

the repair or replacement of any defective part. 
This warranty excludes fair wear and tear and any damage caused by misuse or abuse. Parts such as Blades, Bump 

Knobs, Outer Spools, Cutting Line, Inner Reels, Starter Pulley, Starter Ropes, Drive Belts, Saw Blades, Guide Bars, 

Cultivator Tines, Spark Plugs, Carburettor Adjustments and Filters which can be subjected to use beyond their normal 

intended working capacity are also excluded. 
This warranty is void if  alterations are made to the machine without  MTD Products Australia Pty Ltd  prior written 

authority. 
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a 

replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. 

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the 

failure does not amount to a major failure.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU WILL NEED TO TAKE YOUR PRODUCT AND YOUR 

PROOF OF PURCHASE TO AN AUTHORISED MTD DEALER. YOUR NEAREST MTD DEALER CAN BE FOUND at  

www. mtd.com.au.  All SERVICING AND REPAIRS MUST USE GENUINE SPARE PARTS OR YOUR WARRANTY 

WILL BE VOID.
For your Record:

Retailers Name: ........................................................................ Address: 

 ......................................................................................

Phone No:  .................................................................................. 

Model No:  ..................................................................................

Serial No:  .................................................................................... 

Date of Purchase:  ....................................................................

MTD Products Australia Pty Ltd.   
Postal Address:  PO. Box 376 Dandenong. Vic.  3175         
Business Address: 6 Zenith Road, Dandenong. Vic. 3175 and  97 Trade Street. Lytton.
Qld. 4178
Email Address:  [email protected]         Customer Service Phone: 1300 951 594

A.B.N. 96 004 873 572

     © Copyright 2012

04016921 

Revision   10.1. 2012

Содержание compact log splitter

















Отзывы: