MTD C Style, Руководство оператора

Страница: 21 / 28

21
1. 731-2635 Snow Removal Tool Mount
2. 684-04057 Impeller Assembly, 12” Dia.
3. 710-0347 Hex Screw, 3/8-16, 1.75, Gr5
4. 710-0451 Bolt, Carriage, 5/16-18, .750 Gr1
5. 710-0604A Screw, 5/16-18, 0.625
6. 710-0703 Screw, Carriage, 1/4-20, .750, Gr5
7. 712-04063 Nut, Flange Lock, 5/16-18, Nylon
8. 712-04064 Nut, Flange Lock, 1/4-20, Nylon
9. 712-04065 Nut, Flange Lock, 3/8-16, Nylon
10. 714-04040 Cotter Pin, Bow-tie
11. 725-0157 Cable, Tie, 3/16 x .05 x 7.4
12. 726-04012 Nut, Push-on, .25 Dia
13. 731-04705 Chute, Adapter 5” Dia
14. 732-0611 Spring, Extension, .38 OD x 3.6
15. 736-0174
Washer, Wave, .625 x .885 x .015
16. 736-0242 Washer, Bell, .340 x .872 x .060
17. 736-0463 Washer, Flat, .25 x .630 x .0515
18. 731-2643 Snow Removal Tool
19. 738-0143 Screw, Shoulder, .498 x .34, 3/8-16
20. 738-0281
Screw, Shoulder, .625 x .17, 3/8-16
21. 738-04124A Shear Pin, .25 x 1.50
22. 741-0245 Bearing, Hex Flange x .75 ID
23. 741-0309 Bearing, Ball, .75 ID x 1.85 OD
24. 756-0981A Flat Pulley, Idler, 2.75 OD
25. 790-00075 Housing, Bearing, 1.85 ID
26. 790-00080 Bracket, Auger Idler w/ Brake
27. 618-04170 Gearbox Assembly, Auger, 22”
618-04171 Gearbox Assembly, Auger, 24”
618-04172 Gearbox Assembly, Auger, 26”
618-04173 Gearbox Assembly, Auger, 28”
28. 684-04068 Housing Assembly, Auger 22”
684-04069 Housing Assembly, Auger 24”
684-04070
Housing Assembly, Auger 26”
684-04071 Housing Assembly, Auger 28”
29. 684-04107 Spiral Assembly, LH
30. 684-04108 Spiral Assembly, RH
31. 731-04870* Spacer, 1.25 OD x .75 ID x 1.00
32. 736-0188 Washer, Flat, .76 x 1.49 x .06
33. 741-0493A Bushing, Flange, .80 ID x .91 OD
34. 790-00087A Housing, 1” Hex Bearing
35. 790-00117 Shave Plate, 2.25 x 21.66
790-00120 Shave Plate, 2.25 x 23.66
790-00121 Shave Plate, 2.25 x 25.66
790-00118
Shave Plate, 2.25 x 27.66
36. 784-5580 Slide Shoe
37. 719-0319 Housing, Auger, RH Reduced
38. 719-0320 Housing, Auger, LH Reduced
39. 721-0179 Seal, Oil, .750 ID
40. 741-0662 Bearing, Flange, .75 x 1.0 x .59
41. 710-0642 Screw, Self-tapping, 1/4-20, 0.750
42. 711-04286 Axle, Auger, 22”
711-04285 Axle, Auger, 24”
711-04284 Axle, Auger, 26”
711-04283 Axle, Auger, 28”
43. 714-0161 Key, Hi-pro 3/16 x 5/8
44. 715-04021 Pin, Dowel, .25 OD x 1.2
45. 717-04126 Shaft, Worm .75 OD
46. 717-0528A Gear, Worm 20T
47. 718-04071 Collar, Thrust
48. 721-0325 Plug, 1/4 x .437
49. 721-0327 Seal, Oil, .75 x 1 x .131
50. 736-0351 Washer, Flat, .760 ID x 1.5 OD
51. 736-3084 Washer, Flat, .51 x 1.12
52. 741-0663 Bearing, Flange, .75 x 1.0 x .925
53. 741-0661A Bearing, Flange, .75 x 1.00 x .975
54. 746-04230 Clutch Cable, Auger, 47.23”
55. 629-0071 Extention Cord, 110V
9
Illustrated
Parts List
NOTE: Snow thrower features and components vary by model. NOT all parts listed above and pictured
on the previous page are standard equipment.
* None found between spirals on models with 22-inch auger housing.
* One found between spirals on models with 24-inch auger housing.
* Two found between spirals on models with 26-inch auger housing.
* Three found between spirals on models with 28-inch auger housing.
To order replacement
parts, contact
1-800-800-7310,
or visit
www.mtdproducts.com.