background image

14

SECTION 5:  OPERATING YOUR LAWN TRACTOR

Safety Interlock Switches

This tractor is equipped with a safety interlock system 
for the protection of the operator. If the interlock system 
should ever malfunction, do not operate the tractor. 
Contact an authorized 

MTD 

service dealer.

The safety interlock system prevents the engine 
from cranking or starting unless the parking brake is 
engaged, and the PTO (Blade Engage) lever is in 
the disengaged (OFF) position.

The engine will automatically shut off if the operator 
leaves the seat before engaging the parking brake.

The engine will automatically shut off if the operator 
leaves the tractor’s seat with the PTO (Blade 
Engage) lever in the engaged (ON) position, 
regardless of whether the parking brake is 
engaged.

The engine will automatically shut off if the operator 
engages the PTO with the parking brake ON.

With the ignition key in the 

NORMAL MOWING

 

position, the engine will automatically shut off if the 
PTO (Blade Engage) lever is moved into the 
engaged (ON) position with the shift lever in 
Reverse.

Models without Reverse Caution Mode

The engine will automatically shut off if the PTO 
(Blade Engage) lever is moved into the engaged 
(ON) position with the shift lever in Reverse.

Models with Reverse Caution Mode 

With the ignition key in the NORMAL MOWING 
position, the engine will automatically shut off if the 
PTO (Blade Engage) lever is moved into the 
engaged (ON) position with the shift lever in 
Reverse.

WARNING: 

Do not operate the tractor if the

interlock system is malfunctioning. This
system was designed for your safety and
protection.

Reverse Caution Mode 

(if equipped)

WARNING: 

Use extreme caution while

operating the tractor in the 

REVERSE

CAUTION MODE.

 Always look down and

behind before and while backing. Do not
operate the tractor when children or others
are around. Stop the tractor immediately if
someone enters the area.

The 

REVERSE CAUTION MODE

 position of the key 

switch module allows the tractor to be operated in 
reverse with the blades (PTO) engaged. 

IMPORTANT: 

Mowing in reverse is not recommended

To use the 

REVERSE CAUTION MODE

:

IMPORTANT:

The operator MUST be seated in the 

tractor seat.

1.

Start the engine (Refer to 

Starting the Engine

 page 15 

of this Operator’s Manual for detailed instructions).

2.

Turn the key from the 

NORMAL MOWING

 

(Green) position to the 

REVERSE CAUTION 

MODE

 (Yellow) position of the key switch module. 

See Figure 10.

3.

Depress the 

REVERSE PUSH BUTTON

 (Orange, 

Triangular Button) at the top, right corner of the key 
switch module. The red indicator light at the top, left 
corner of the key switch module will be 

ON

 while 

activated. See Figure 10.

4.

Once activated (indicator light 

ON

), the tractor can 

be driven in reverse with the cutting blades (PTO) 
engaged.

5.

Always look down and behind before and while 
backing to make sure no children are around.

6.

After resuming forward motion, return the key to the 

NORMAL MOWING

 position. 

IMPORTANT:

 The 

REVERSE CAUTION MODE

 will 

remain activated until:

a. The key is placed in either the 

NORMAL 

MOWING

 position or 

STOP

 position.

b. The operator engages the parking brake by 

fully depressing the clutch-brake pedal and 
holding it down while moving the parking 
brake lever into the PARK BRAKE position.

Figure 10

3TART

0OSITION

3TOP

0OSITION

2EVERSE

0USH"UTTON

2EVERSE

#AUTION-ODE

0OSITION

)NDICATOR

,IGHT

Содержание 791

































Отзывы: