SERIES 830 SELF PROPELLED
6
3.24. Push out the transmission cable bracket.
3.25. Remove the cable from transmission bracket.
3.26. Remove the transmission from baffle. See Fig-
3.27. The cable can be disconnected from the trans-
mission by squeezing the tabs that secure the
cable housing to the bracket.
3.28. Inspect for damaged or worn parts. replace as
need.
NOTE:
This producer is necessary to replace
the transmission or the drive cable.
3.29. Assemble mower by reversing the removal pro-
cedures.
NOTE:
This is a non-serviceable transmission
the following is done as a professional courtesy
so you may see inside of the transmission.
4.
FRONT AXLE
4.1.
Remove the spring bracket cover
4.2.
CAREFULLY using some recoil rope or a spring
puller disconnect spring. See Figure 4.2.
Figure 3.24
Cable bracket
Figure 3.26
Transmission
Figure 4.2
Spring
Recoil rope
