MT Logic TWINTALKER 9310, Руководство пользователя

Страница: 9 / 102

Twintalker 9310 9
Twintalker 9310
ENGLIS
H
12.1 Turning the Unit ON/OFF
12.2 Battery Charge Level/Low Battery Indication
The battery charge level is indicated by the number of squares present inside the battery icon
on the LCD Screen.
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
When the battery charge level is low, the battery icon will flash and a beep will be heard to
indicate that the batteries need to be replaced or recharged.
12.3 Adjusting Speaker Volume
12.4 Receiving a Signal
The unit is continuously in the receive mode when the unit is switched ON and not
transmitting.
To turn ON:
• Press and hold the - button for 2 seconds. The unit will
“beep” and the LCD display will display the current channel.
To switch OFF:
• Press and hold the - button for 2 seconds. The unit will
“beep” and the LCD display will turn blank.
• Press the - button in stand-by-mode to increase the
speaker volume. The volume level is displayed.
• Press the - button to decrease the speaker volume.
Never recharge non-rechargable batteries like for exemple Alkaline
batteries.
In order for other people to receive your transmission, they must also be
on the same channel and have set the same CTCSS code or DCS code.
(See chapter “12.6 Changing Channels” and “12.7 CTCSS (Continuous
Tone Coded Squelch System) / DCS (Digital Coded Squelch)”)
Either CTCSS or DCS can be used but never both at the same time.
HL_TT9310 MT-Logic.book Page 9 Tuesday, January 27, 2015 4:41 PM