User’s Manual
MSE PSE-S+
MSTRONIC CO., LTD.
2
1. General Information
The PoE Switch PSE-S+ provides seven 10M/100M/1000M TX ports with PoE PSE
function plus one 10M/100M/1000M TX up-link port. It allows power souring equipment (PSE) to
be powered from DC source and delivers power to any PoE powered device (PD) which is
compliant with IEEE802.3af/at standards.
In the LT PoE++ model, the PoE PSE delivers power up to 70W/port to a PD.
The LTPoE++ is
Linear Technology Corporation’s specification. This specification provides detection and
classification extensions to existing IEEE PoE protocols. It is backward compatible with IEEE
802.3af and 802.3at.
2. Hardware Description
*LED Indicator
There are 18 LEDs on the PoE switch to indicate the status of power and signal. The following
section describes the functions of each LED indicator.
Front panel detail
*POWER LED
LED
STATUS
Description
Power
Green
LED ON when power input (DC IN on
rear panel or Port 8 (UPLINK) on front
panel) has valid power supplied.
