User’s Manual
MSE PSE-SW8 Series
MSTRONIC CO., LTD.
6
The Port 8 may get power over the signal pair or spare pairs, the connection as:
* Data pair A plus V+ /V- on lines 1 and 2
* Data pair B plus V-/V+ on lines 3 and 6
* V+/V- on line 4 and 5
* V-/V+ on line 7 and 8
The terminal block on the rear panel should be wired as detailed below:
The DIN-4P connector on the rear panel also used for power input, you can use an AC/DC adapter
with DIN-4P connector directly, recommends adaptor as detailed below: (OPTION)
MS-180-18
MS-180-24
MS-180-56
Maximum output
18VDC/8.33A
24VDC/6.25A
56VDC/3.21A
Related model
PSE-SW8S
PSE-SW8S
PSE-SW8S
PSE-SW8D
*Ethernet Port/PD Port Wiring
The PoE Switch supports Port 1 to Port 8 with automatic MDI/MDI-X crossover, autosense of the
speed and duplex for 10Base-T or 100Base-TX connections. Automatic MDI/MDI-X crossover
allows you to connect to other devices (switches, hubs, or workstations etc.), without regard to
using straight-through or crossover cabling.
