User’s Manual
MSE PSE-SW8 Series
MSTRONIC CO., LTD.
3
1. General Information
The PSE-SW8 PoE Switch family provides a PoE/Data input port that is compatible with 802.3af
and 802.3at (Type 1 and Type 2) and it has seven 10M/100M TX ports with PoE PSE function. In
addition to the ability to accept 48VDC PoE input on Port 8, the model provides secondary DC wire
terminal input for PoE switch operation from 12V to 57VDC. If powered the model via rear DC
terminal, the PoE output voltage is equal to the input voltage. The PoE Switch can be used as an
Ethernet/PoE repeater to extend Ethernet data and DC power up to 200 meters.
This manual will
help you install and maintain the PoE switch. Installation of the PoE switch is very easy and you
will begin to operate as soon as you are powered up.
The PSE-SW8 comes with DIN rail mounting clips for ease of mounting in network cabinets.
2. Hardware Description
*LED Indicator
There are 18 LEDs on the PoE switch to indicate the power and operational status. The following
section describes the functions of each LED indicator.
Front panel detail
the port number is as the diagram shows.
5
6
7
8
1
2
3
4
