MST ImPact, Руководство пользователя

Страница: 15 / 28

WRN wireless repeater node
MST
Owner’s Manual
Revision 1.7
– 26 April 2018
© Mine Site Technologies Pty Ltd 2017 Commercial in Confidence 8
Software
Web Configuration
The WRN has a built-in web-server that can be accessed from a PC to configure the device's
settings. The IP address of the WRN can be discovered and configured using the MST Device
Scanner software tool.
NOTE:
The Device Scanner tool can be downloaded from:
https://support.mstglobal.com/releases/software/devicescanner/
Device Discovery
The MST Device Scanner can be used to discover and change the IP address of IMPACT
devices from any PC connected to the same network switch (i.e. the tool will not work if there is
a router between the PC and the device being scanned). Upon opening, the Device Scanner
will automatically scan for devices.
To use the Device Scanner, navigate to the folder where the program is stored, and double
click
devicescanner.exe .
The Device Scanner shows several columns of information for each discovered device:

Name - The hostname of the device. For the WRN, the default name is WRN.

IP Address - This can be set remotely on the device, in Settings > LAN > LAN Settings, or
from the Device Scanner (see below).

Type - The device type or model.

MAC Address - The MAC address of the device.

Interface - The network interface via which the Device Scanner is communicating with the
device.