MST BlastPED III, Руководство оператора

Страница: 21 / 25

BlastPED III Operator Manual
21
BlastPED III Maintenance
BlastPED III is designed for use in mining environments, but effort must be made to treat the
unit with an appropriate level of care. It is responsible for initiating explosives; improper use
and handling will compromise safety and productivity.
Recharging the Battery
The BlastPED III is powered by a rechargeable battery. The battery is internal to the unit and
connected to the provided charger via the charging port.
The Charger has three indicator lights.
•
Power ON
– RED Light
•
Charging
– AMBER light
•
Charge Complete
– GREEN light, steady glow
If the GREEN Charge light is blinking, it indicates the charger is not connected to the battery
and may indicate the charger is not connected to the BlastPED III properly.
A complete charging cycle takes about 2 hours. Proper and adequate charging is the single
most important factor in obtaining optimum life from a battery.
Service
Only Mine Site Technologies technicians are authorized to service a BlastPED III. Opening
the unit is grounds for voiding the warranty and claims. If a unit is not operating as expected it
should be tagged out and returned to Mine Site Technologies as soon as possible.
BlastPED III units should be audited by an approved Mine Site Technologies service
technician at least once every year.