MST BlastPED III, Руководство оператора, Страница: 17 / 25

BlastPED III Operator Manual
17
Sending BlastPED III Messages
Creating the ARM and BLAST commands is done using PEDcall for Windows Version 6 or
later. Please refer to the PEDcall documentation and help files for more information including
software setup.
The Blasting Message Panel
BlastPED commands are accessed from a dedicated blast message panel. This can be
opened by clicking on the BlastPED icon in the main application toolbar.
Blasting can be carried out in one of three ways;
as Individuals, in Groups, or All BlastPEDs fired
at the same time. A unit armed in one way cannot
be blasted using another. To create multiple ARM
and BLAST messages without opening the
message panel each time, check the Remain
open after selection box that is located bottom
left.
To exit the blast message panel without creating
a message either click on the Close button or
press ESC.
Understanding Blasting Messages
Blasting messages are handled differently to other PED messages. Operators should be
aware of these differences before being authorised to create ARM and BLAST commands.