MSSC, LLC
618-343-1006
Page 2
2.
If it cannot purge
, then there may a software conflict. Go to msscllc.com and
download the newest software version. Then update according to proper
procedures as prescribed in the owner’s manual.
ii.
No
– You need to adjust the internal sensor sensitivity. This is located inside the
printer, near the base of the latch. Put the screwdriver that came with the printer in
the slot and twist clockwise gently, it increases the sensitivity of the sensor, and you
can now see black and clear. If this still does not work, you may need the external
photo sensor,
P/N: 80870
9.
Does the printer software have any foreign languages
?
a.
Yes, the Smart-Jet Plus comes default with English, Spanish, French, German, Chinese,
Portuguese, and Swedish. See the settings in the printer for “Language”
10.
Will any HP Ink cartridge work in the Smart-Jet Plus printer?
a.
No, you must use MSSC ink, or an “Invalid Cartridge” error will display, and the unit will not
print. This ink is uniquely formulated to work in industrial applications in the Smart-Jet, and
Smart-Jet Plus printers.
Wi-Fi connection
11.
How do I set up the Wi-Fi feature?
a.
MSSC requires the E1200 Linksys Router to work properly. There are multiple steps:
i.
Turn on the router and plug it into the wall. Do NOT use the Ethernet cable and do
NOT connect it to the internet. This is a Local Area Network (LAN)
ii.
Download the MSSC Printer Application in the Apple store or Google Play store
1.
If there is a username and password, they are: Administrator and
mssc@smartjet
iii.
Using your phone/tablet, connect to the new Wi-Fi and note the SSID (name of the
router signal)
1.
The router must use either no security, or WPA/WPA2
iv.
Go to the Smart-Jet Plus printer now and then Settings
Wi-Fi
Connect
1.
If there is a password, insert it
v.
Press enter and the printer will now try to connect to the Router
1.
The printer will assign an IP Address (192.168.1.2, etc.)
2.
Copy the IP Address down
vi.
Go back to the App on your phone/tablet and click the three blue bars stacked on
each other in the top left.
1.
Click it, then select Printers
2.
Now at the bottom should be a blue bar with the word “search” on it
a.
Select it
3.
Your printer name should pop up
a.
Press and hold on it until a new menu pops up
i.
Press Connect
vii.
You should now be connected
