MSSC QM2-101, Руководство по эксплуатации

Страница: 4 / 35

3
MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 55899 Rev 18210
www.msscllc.com
Installation
2. Mount the base clamp to the
conveyor or floor.
Mount the QM2 to a solid structure such as a
conveyor side rail. For floor mounting,
secure the base clamp to the floor using
concrete anchors. Use standard 18 mm
tubing. Support the unit to prevent the print
head from swaying or vibrating.
NOTE: the conveyor side rails should be 1/8”
x 2.5” or greater steel.
1. Select the mounting location.
Select a mounting location where there are
guide bars on the conveyor. This will keep
the print head at the correct distance of
1/8”
(3mm) from the product preventing damage
to the QM2. CAUTION : Avoid contact
between the QM2 and the product as print
quality may suffer.
3. Assemble the bracketry to the base clamp.
Make sure the bracket is mounted securely. You want to avoid sway and vibration in the print head. This
will greatly affect print quality.