18
WIRED CONTROLLER OPERATION
Heater Button:
Press HEATER button to start or stop heating.
The filter will automatically be running for 15 seconds to test the working condition once the HEATER
function is started. If there is no abnormality, the heater will keep working until the water temperature
reaches the set value. When the water temp goes below the set temp, the heater will restart to heat
the water automatically. The HEATER button displaying red means that the heating system is
activated. The HEATER button displaying green means that the system is at rest and keeping the
water at the set temp.
Filter Button:
Press FILTER button to turn the function on/off. The light of FILTER button displays
green when activated.
NOTE:
Filtration cannot be turned off when Heating is activated. When the Heating function is turned
off, filtration will be stopped after 30 seconds. Filtration function can then be activated separately.
NOTE:
The auto-filtration system is automatically activated every 4 hours.
Bubble Button:
Can adjust among 3 levels of bubbling power. The default bubbling massage
power is at level 2 (450W). Press the BUBBLE button again, switching to level 3 (700W). Press again
to enable level 1 (300W). To shut down the function, press the BUBBLE button for 3 seconds.
NOTE:
The bubbling massage function will be shut down automatically after every 20 minutes
FILTER
HEATER
BUBBLE
JET
Heater Button
- Adjust the bubble level by pressing
the button (L1: 300W, L2: 450W, L3: 700W)
Bubble Button
Up Button
Filter Button
Timer Button
Down Button
Jet Button
Celsius/Fahrenheit
Toggle Button
Ozonator Button
JET
Temperature display:
Insert the plug into the socket, the current temperature is displayed on the screen.
Jet Button:
To activate the water jet massage function.
NOTE:
The Bubble button can only be adjusted between L1 (300W) and L2 (450W) while the Jet
function is on. JET function will shut down automatically after one-hour continuous operation.
