15
Reinstall the clean or spare cartridge back onto the spa tub wall but turning it on clockwise. (Fig.1.3)
MSpa Water Treatment kit is strongly recommended for spa use.
Press the Bubble button on the spa control panel to turn on the bubble air
blower and help dissolve the chemicals into the water.
Never mix chemicals together. Add the chemicals to the spa water separately.
Thoroughly dissolve each chemical before adding one to the water.
B0301858 MSpa Chemical Starter Kit
(20 X 20g Bromine T 500ml Alg Floating Dispenser)
Disinfectant for water spas and pools. disinfectant, algaecide and bactericide.
B0301859 Bromine Tablets - 50 X 20g Bottle
Slowly dissolve in water to provide active bromine sanitizer in the form of
hypobromous acid.
B0301860 Chlorine Granules - 1Kg Bottle
Adds isocyanuric acid to the spa water which resists chlorine loss from UV rays. Does
not contain calcium, can be used to sanitize hard water without increasing the calcium hardness. Contains troclosene
Sodium, dehydrate 100%.
B0301861 Algaecide - 1L Bottle
Kills all types of algae, including green and mustard algae. Non-foaming algaecide for improving
and conserving water in spas. Contains polymeric quaternary ammonium chloride 7%.
B0301862 pH Plus - 1Kg Bottle
For increasing the pH in the spa water. Contains sodium Carbonate 100%.
B0301863 pH Minus - 1Kg Bottle
For decreasing the pH in the spa water. Contains sodium bisulphate 100%.
1.1
1.2
1.3
5
2. Change the spa water every 3-5 days depends on the spa use. See “Cleaning, draining and storage” section for instruction.
3. Use spa chemicals to maintain proper water chemistry. Spa damage resulting from misuse of chemicals and mismanagement
of spa water is not covered by the warranty. Consult with your local spa or pool retailer for more information on chemical use.
4. All occupants must shower before entering the spa.
5. When spa inlet or outlet is stuck with dirt. Use the Wrench to check the
problem and clean the inlet or outlet.
Water Balance
Maintain the spa water pH level between 7.2 and 7.8, total alkalinity between 80
and 120ppm and free chlorine level between 3 to 5ppm. Use the *optional
Test Strips to test the spa water chemistry before each use of the spa and continue to test the water no less than once a week.
The Test Strips can test the “Free Chlorine”, “pH”, and “Total Alkalinity” level at the same time:
1. Dip the entire strip into the water and remove immediately
2. Hold the strip level for 15 seconds. Do not shake excess water from the strip
3. Compare the strip pad to the color chart on the packaging label. If necessary, adjust the chemical level in the pool water
NOTE:
Low pH will damage the spa tub and pump. Damage resulting from the chemical imbalance will void the warranty.
High pH (hard water) will result in white coagulations inside the filter pump; which may lead to pump damage.
IMPORTANT:
MSpa Water Treatment Kit
MSpa Water Treatment Kit