21
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
NO DISPLAY ON
THE CONTROL
PANEL
Power failure
PRCD is off
PRCD broken
Check power supply
Contact the MSpa Service Center
NOT HEATING
PROPERLY
Temperature set too low
Heating element failed
Low water level
Set a higher temperature
Contact the MSpa Service Center
BUBBLE AIR
BLOWER DOES
NOT WORK
Bubble motor failure
Auto-off 10 minute
Inflation knob is in <ON> position
Contact the MSpa Service Center
SPA LEAKING
Spa inlet/outlet connection not
securely tight
Tighten the inlet and outlet connection by
wrench
Reset PRCD by following PRCD Testing
section
Water leaks from the spa
pool body
Waiting for 10 minutes and turn on the
Bubble button again
Turn the knob to <OFF> position and turn
on the bubble button again.
Drainage valve is not closed
completely
Close the drainage valve. Contact the MSpa
Service Center, if spa is still leaking
Repair the leaking hole/spilt with the repair
kit material
Add more water to reach the minimum
water line