background image

Software Application Guide

Control Center

11

Software Application Guide

Control Center

Green Power

Under the Green Power tab, you can select the Green Power mode,  read CPU Phase 

status, also select other power phase and control fan speed.

This application provides APS, Intel SVID, and Disable mode for CPU power phase 

display. In APS and Intel SVID mode, when you adjust CPU voltage, the CPU phase 

control will switch to Disabled mode automatically.  You can change the CPU fan and 

system fan speed as well to get a good balance between performance and power sav-

ing. After setup is complete, click the “Apply” button at the bottom of the tab to apply 

changes or click the “Save” button to save the adjustment for future use.

Important

Every time you shut down the system, the configured setting will be restored to the 

factory default. If you want to use the saved settings, you have to load it every time by 

clicking the “Load” button.

Green Power Mode

There are two preset mode for fan control.

Default: CPU fan speed: 100%, System fan speed: 100%

Silent: CPU fan speed: 50%, System fan speed: 50%

Important

The Control Center provides a safety funcation. A warning pop-up message will appear 

when the CPU temperature reaches 75 degrees. Meanwhile it will automatically switch 

to Default mode for maximum fan speed. 

Содержание X58 PLATINUM SLI - Motherboard - ATX











































































Отзывы: