MSI Wind Box DC500, Руководство пользователя

Страница: 31 / 62

2-7
MS-6676
C
onneCting
p
eripHeral
d
eviCeS
The I/O (input/output) ports on the rear panel allow you to connect peripheral
devices. All devices listed here are for reference only.
Connecting the USB Devices
This Wind Box DE500/ DC500 provides USB ports for connecting various USB
devices, such as mouse, keyboard, digital camera, webcam, printer, external
optical storage device,.. and etc. To connect these devices, install the drivers
for each device first if necessary, and then connect the device to the Wind Box
DE200/ DC200. This Wind Box DE200/ DC200 is capable of auto detecting the
USB devices installed, and if there is no detection of the devices, please manu-
ally enable the USB devices by going to Start Menu / Control Panel / Add Hard-
ware to add the new device.
Connecting the External Display Devices (Optional)
This Wind Box DE500/ DC500 provides a VGA port for connecting a larger display
with higher resolution. The 15-pin-D-sub VGA port allows users to connect an ex-
ternal monitor or other standard VGA-compatible device (such as a projector) for a
great view of the Wind Box DE500/ DC500 display.
This Wind Box DE500/ DC500 provides a HDMI port for connecting a larger display
with higher resolution. HDMI (High Definition Multimedia Interface Support) is a new
interface standard for PCs, displays and consumer electronics devices that supports
standard, enhanced and high-definition video, plus multi-channel digital audio on a
single cable.
To connect the external display, make sure the Wind Box DE500/ DC500 and the
external display are both powered off, and then connect the display to the Wind Box
DE500/ DC500.
Once the display is connected to the Wind Box DE500/ DC500, power on the Wind
Box DE500/ DC500 and the external display should respond by default. If not, you
can switch the display mode by pressing [Fn]+[F2]. Alternately, you can change the
display mode by configuring the settings in Display Properties of Windows operating
system.