MSI P55 GD80 - Motherboard - ATX Скачать руководство пользователя страница 48

Страница: 48 / 150

2-32

Hardware Setup

▍

MS-7581

Standby LED

Lghts orange when the system s n standby (S3/S4/S5 ) status.

HD LED

Lghts red when the hard drve s operatng.

Debug LED Panel

Please refer to the table below to get more nformaton about the Debug LED mes-

sage.

Post

Status

Power on and first ntalze CPU.

C0, C1, C2

Early CPU Intalze.

C4, C6

Intalze chpset.

D4, D5

Intalze memory.

Intalze keyboard.

2A, 31

Intalze onboard devces. Load Opton ROM (VGA and RAID opton

ROM) form BIOS to memory.

Dsplayng sgn-on message, CPU nformaton, setup key message

and any OEM specfic nformaton.

Intalze USB devce and dfferent devces.

Md POST ntalzaton of chpset regsters. Detect dfferent devces

(parallel ports, seral ports and coprocessor n CPU...etc.)

75, 78

Intalze INT 13 devces and IPL devces. (nclude SATA/ PATA HDD

and CD/DVD ROM).

Enter setup screen. BIOS setup f needed/ requested.

Wat for user nput at configuraton dsplay f needed.

Dsplay the system configuraton screen f enabled.

Save system context for ACPI (Advanced Configuraton and Power

Interface).Prepare gve control to OS loader (INT 19H).

Pass control to OS Loader (typcally INT 19H).

Enter OS (Vsta or Wndows

XP).

Содержание P55 GD80 - Motherboard - ATX























































































































































Результаты поиска

Содержание P55 GD80 - Motherboard - ATX

Отзывы:

MSI P55 GD80 - Motherboard - ATX, Руководство пользователя, Страница: 48 / 150

Результаты поиска

Содержание P55 GD80 - Motherboard - ATX

Отзывы: