MSI P55 GD80 - Motherboard - ATX Скачать руководство пользователя страница 138

Страница: 138 / 150

C-26

Intel SATA RAID

▍

MS-7581

Intel SATA RAID

▍

MS-7581

egraded

raid a

rray

A RAID 1, RAID 5 or RAID 10 volume s reported as degraded when one of ts hard drve

members fals or s temporarly dsconnected, and data mrrorng s lost. As a result, the

system can only utlze the remanng functonal hard drve member. To re-establsh

data mrrorng and restore data redundancy, refer to the procedure below that corre-

sponds to the current stuaton.

Mssng Hard Drve Member

Make sure the system s powered off.
Reconnect the hard drve.
Reboot the system to Wndows; the rebuld wll occur automatcally.

Faled Hard Drve Member

Make sure the system s powered off.
Replace the faled hard drve wth a new one that s of equal or greater capacty.
Reboot the system to Intel RAID Opton ROM by press <Ctrl> and <I> keys smul-

taneously durng the Power-On Self Test (POST).

1.
2.
3.

Select the port of the destnaton dsk for rebuldng, and then press ENTER.

Содержание P55 GD80 - Motherboard - ATX























































































































































Результаты поиска

Содержание P55 GD80 - Motherboard - ATX

Отзывы:

MSI P55 GD80 - Motherboard - ATX, Руководство пользователя, Страница: 138 / 150

Результаты поиска

Содержание P55 GD80 - Motherboard - ATX

Отзывы: