All specifications and informations are subject to change without notice.
-1-
Please always place
this device on a stable
surface; otherwise,
i t m a y f a l l a n d b e
damaged.
The altitude and the
tropical environment
the adapter fits depend
on which adapter is
used for the device.
The rating plate on
the back of the device
with the above warning
sign indicates that
t h i s p r o d u c t i s
a p p l i c a b l e f o r t h e
safe use of the region
w i t h a l t i t u d e o f
2,000m and below.
Do not hold the plug
w i t h w e t h a n d ;
otherwise, electric
s h o c k m a y o c c u r.
Make sure the plug
h a s a g o o d t o u c h
because poor touch
may cause fire.
Do not use a broken
power plug nor keep
a power cord near heat
source; otherwise,
e l e c t r i c s h o c k o r
fire may occur.
When cleaning the
device, be sure to
remove the power
p l u g , u s e a p i e c e
of soft cloth rather
t h a n i n d u s t r i a l
c h e m i c a l t o c l e a n
the device, be sure
not to let water enter
the device.
Do not disassemble
this device without
permission. In case
of failure, be sure to
contact a professional
servicing person to
fix it. The authorized
disassembly of this
d e v i c e m a y r e s u l t
in electric shock or
fire.
In case of rare smell
or noise out of this
device, be sure to
immediately cut off
the power supply and
ask a professional
servicing person to
fix the problem.
W h e n t h i s d e v i c e
is idle for long time,
be sure to power it
off; otherwise, electric
s h o c k o r f i r e m a y
occur.
I.Safety Prevention Measures
Note:
The device with AC switch may use such AC switch as cut-off component.
The device without AC switch may use power plug or coupler as cut-off component.
In case of the normal use of the equipment, make sure the cut-off component
can be accessed easily.
All specifications and informations are subject to change without notice.
-2-
II.Installation Instructions
1.Accessories
Power adapter
Signal cable
User manual
Base/Stand
Warranty card
(The above pictures are for illustration only and the physical accessories shall govern.)
2. Adjustment of Rotation Angle
(The above pictures are for illustration only and the physical accessories shall govern.)
1.
The screen may be inclined 5°
forward and 20°backward.
2.
and right within -30°-30°.
The angle may be adjusted left
3.
Vertical direction can be adjusted
up and down within 65mm.
4.
display, be sure not to touch or
press the screen area.
When adjusting the angle of the
3. Project Assembly
See the assembly sketch on the cover of the packaging case.
