MSI MS-7145 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 106

MSI MS-7145 Скачать руководство пользователя страница 3

iii

Copyright Notice

T he material in this document is the intellec tual property of

M ICR O-STAR

INTERNATIONAL

. W e take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

AMD, Athlon

™

64 and Athlon

™

FX are registered trademarks of AMD Corporation.

Intel

®

and Pentium

®

are registered trademarks of Intel Corporation.

PS/2 and OS

®

/2 are registered trademarks of International Business Machines

Corporation.
Microsoft is a registered trademark of Microsoft Corporation. W indows

®

98/2000/NT/

XP are registered trademarks of Microsoft Corporation.
NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trade-
marks of NVIDIA Corporation in the United States and/or other countries.
Netware

®

is a registered trademark of Novell, Inc.

Award

®

is a registered trademark of Phoenix Technologies Ltd.

AMI

®

is a registered trademark of American Megatrends Inc.

Kensington and MicroSaver are registered trademarks of the Kensington Technology
Group.
PCMCIA and CardBus are registered trademarks of the Personal Computer Memory
Card International Association.

Revision History

Revision

Revision History

Date

V2.1

Update for PCB 2.X

Aug. 2005

with RS480/ RS482 & SB400

This  device complies with  Part  15 of  the  FCC Rules.  Operation is  subject to  the
following  two  conditions:
(1) this device may not cause harmful interference, and
(2)  this device  must accept any  interference  received, including interference  that
may cause undesired operation

«
1
2
3
4
5
...
»

Содержание MS-7145











































































































Отзывы:

Нет отзывов