MSI MS-7145, Руководство пользователя

Страница: 2 / 106

ii
Manual Rev: 2.1
Release Date: Aug. 2005
FCC-B Radio Frequency Interference Statement
This equipment has been tested
and found to comply with the
limits for a class B digital device,
pursuant to part 15 of the FCC
rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the measures listed below.
=
Reorient or relocate the receiving antenna.
=
Increase the separation between the equipment and receiver.
=
Connec the equipment into an outlet on a circuit different from that to which the
receiver is connected.
= Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user
’
s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D
’
INSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7145