2-24
M S-7100 ATX M ainboard
D-Bracket
™
2
Description
Initializing Floppy Drive Controller
This will initialize Floppy Drive and controller.
Boot Attempt
This will set low stack and boot via INT 19h.
Operating System Booting
NV SLI (Scalable Link Interface) Connector: PCI_E4
NVIDIA SLI (Scalable Link Interface) technology allows two GPUs to run in
tandem within a system to achieve up to twice the performance of a single graphics
card. To utilize this technology, the two GPU cards
must be connected by an SLI bridge card.
You c an find an SLI s witc h c ard on the
mainboard configured to
non-SLI
mode by default
(fig.1).
MSI Reminds You...
Make sure that you power off the system before removing the SLI
switch card.
Fig.1
non-SLI mode
Fig.2
Turn the latc h to
loosen the card
If you intend to use the SLI interface for better graphics performance, please
refer to the following instructions.
1. Turn the latch either right or left to loosen the SLI switch card (refer to fig.2).
SLI Switch Card
SLI Bridge Card