manualshive.com logo in svg

MSI MS-7025, Руководство пользователя, Страница: 3 / 113

Поделиться
Скачать
MSI MS-7025 Скачать руководство пользователя страница 3

iii

Copyright Notice

The material in this document is the intellectual property of 

MICRO-STAR

INTERNATIONAL

. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents.  Our products are under
continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

AMD, Athlon™, Athlon™ XP, Thoroughbred™, and Duron™ are registered
trademarks of AMD Corporation.
Intel

®

 and Pentium

®

 are registered trademarks of Intel Corporation.

PS/2 and OS

®

/2 are registered trademarks of  International Business Machines

Corporation.
Microsoft is a registered trademark of Microsoft Corporation.  Windows

®

 98/2000/NT/

XP are registered trademarks of Microsoft Corporation.
NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trade-
marks of NVIDIA Corporation in the United States and/or other countries.
Netware

®

 is a registered trademark of Novell, Inc.

Award

®

 is a registered trademark of  Phoenix Technologies Ltd.

AMI

®

 is a registered trademark of American Megatrends Inc.

Kensington and MicroSaver are registered trademarks of the Kensington Technology
Group.
PCMCIA and CardBus are registered trademarks of the Personal Computer Memory
Card International Association.

Revision History

Revision

Revision  History

Date

V1.0

First  release for PCB 1.X

July 2004

with nVidia nForce3 Ultra

Содержание MS-7025


















































































































Отзывы:

Нет отзывов