manualshive.com logo in svg

MSI MS-7025, Руководство пользователя, Страница: 29 / 113

Поделиться
Скачать
MSI MS-7025 Скачать руководство пользователя страница 29

2-16

 

MS-7025 ATX Mainboard

The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN, USB
Ports, IR module and CPU/System FAN.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.

Connectors

FDD1

Fan Power Connectors: CPUFAN1 / SFAN1 / SFAN2 / NBFAN1

The CPUFAN1 (processor fan), SFAN1 (system fan 1), SFAN2 (system fan 2) and
NBFAN1 (NorthBridge Chipset fan) support system cooling fan with +12V. It supports
three-pin head connector. When connecting the wire to the connectors, always take
note that the red wire is the positive and should be connected to the +12V, the black
wire is Ground and should be connected to GND. If the mainboard has a System
Hardware Monitor chipset on-board, you must use a specially designed fan with
speed sensor to take advantage of the CPU fan control.

SFAN2

+12V

GND

NC

NBFAN1

+12V

GND

Sensor

CPUFAN1

SENSOR

+12V

GND

SFAN1

NC

+12V

GND

MSI Reminds You...

1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN1 supports fan control. You can install 

Core Center 

util-

ity that will automatically control the CPU fan speed according to
the actual CPU temperature.

3. Please refer to the recommended CPU fans at AMD

®

 official

website.

Содержание MS-7025


















































































































Отзывы:

Нет отзывов