Chapter 3
3-16
Set Wake Up Events
Press <Enter> to enter the sub-menu and the following screen appears:
Resume On Ring
When setting to
Enabled
, the feature allow your system to be
awakened from the power saving mode through an incoming call from
the modem. Settings:
Enabled, Disabled
.
Resume On PME#
When setting to
Enabled
, the features allow your system to be awakened
from the power saving modes through any event on PME (Power
Management Event). Settings:
Enabled, Disabled
.
Resume On RTC Alarm
If
Resume On RTC Alarm
is set to
Enabled
, the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in
these fields. Available settings for each item are:
RTC Alarm Date
01~31, Every Day
RTC Alarm Hour
00~23
RTC Alarm Minute
00~59
RTC Alarm Second
00~59
Note:
You need to install a modem supporting power on function for
Wake Up On Ring function.
Note
: If you change these settings, you must reboot the system until it
enters the operating system and then power off the system. By doing so,
the changed settings will come into effect next time when you power on
the system.
All manuals and user guides at all-guides.com
