MSI MS-6566E Скачать руководство пользователя страница 53

Страница: 53 / 76

AMI BIOS Setup

3-9

IDE-1

The system will boot from the second HDD.

IDE-2

The system will boot from the third HDD.

IDE-3

The system will boot from the fourth HDD.

Floppy

The system will boot from floppy drive.

ARMD-FDD

The system will boot from any ARMD device, such

as LS-120 or ZIP drive, that functions as a floppy

drive.

ARMD-HDD

The system will boot from ARMD device, such as

MO or ZIP drive, that functions as hard disk drive.

CDROM

The system will boot from the CD-ROM.

Legacy SCSI

The system will boot from the SCSI.

Legacy Network

The system will boot from the Network drive.

BBS-0

The system will boot from the first BBS (BIOS Boot

Specification) compliant device.

BBS-1

The system will boot from the second BBS (BIOS

Boot Specification) compliant device.

BBS-2

The system will boot from the third BBS (BIOS Boot

Specification) compliant device.

BBS-3

The system will boot from the fourth BBS (BIOS Boot

Specification) compliant device.

Try Other Boot Devices

Setting the option to

Yes

allows the system to try to boot from other

devices if the system fails to boot from the 1st/2nd/3rd boot device.

BootUp Num-Lock

This item is to set the Num Lock status when the system is powered on.

Setting to

will turn on the Num Lock key when the system is powered on.

Setting to

Off

will allow end users to use the arrow keys on the numeric keypad.

Setting options:

and

Off

Note

: Available settings for 1st/2nd/3rd Boot Device vary depend-

ing on the bootable devices you have installed. For example, if you

did not install a floppy drive, the setting Floppy does not show up.

All manuals and user guides at all-guides.com

Содержание MS-6566E













































































Результаты поиска

Содержание MS-6566E

Отзывы:

Бренды по названию

Популярные бренды

MSI MS-6566E, Руководство пользователя

Результаты поиска

Содержание MS-6566E

Отзывы:

Бренды по названию

Популярные бренды