Appendix
A-10
4.
The following window appears.
5.
Select the multi-channel operation you prefer from
No. of Speakers
.
6.
Select the audio device that you wish to use as audio output connectors.
There are two options for this:
Make sure
Use S-Bracket
is NOT selected if
you want to use audio connectors on the back
panel only.
Refer to “Using BACK PANEL connectors only” earlier in
the section for how to attach speakers.
Select
Use S-Bracket
if you want to use audio
connectors supplied by the connected S-
Bracket.
Refer to “Using S-BRACKET connectors” earlier in the
section for how to attach speakers.
7.
Click
OK
.
Note:
It is useless to select “Use S-Bracket” if your motherboard
does not support or have the S-Bracket installed in the system.
