Chapter 3
3-22
Onboard MC’97 Modem
Auto
allows the mainboard to detect whether a modem is used. If a modem is
used, the onboard MC’97 (Modem Codec’97) controller will be enabled; if not,
it is disabled. Disable the controller if you want to use other controller cards to
connect to a modem. Settings:
Auto
,
Disabled
.
Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC
This is used to enable or disable the onboard Floppy controller.
Onboard Serial Port A/B
These items specify the base I/O port addresses of the onboard Serial Port 1
(COM A)/Serial Port 2 (COM B). Selecting
Auto
allows AMIBIOS to automati-
cally determine the correct base I/O port address. Settings:
Auto, 3F8/COM1
,
2F8/COM2
,
3E8/COM3
,
2E8/COM4
and
Disabled
.
Serial Port B Mode
This item sets the operation mode for Serial Port B. Settings:
Normal
,
1.6uS
,
3/16 Baud
and
ASKIR
(the last three operation modes are setting
Option
Description
Auto
BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enabled
Enables the onboard Floppy controller.
Disabled
Disables the onboard Floppy controller.
