Chapter 3
3-36
When you finish the changes and want to quit the Setup program,
select
Save & Exit Setup
. A message as below will appear on the screen:
Type “Y” to quit the Setup program and save the user setup value to RTC
CMOS. Type “N” to return to Setup program.
When you want to quit the Setup program and leave the original
settings, select
Exit without Saving
. A message as below will appear on
the screen:
Type “Y” to quit the Setup Utility without saving data to RTC CMOS.
Type “N” to return to the Setup program.
Save & Exit Setup/Exit without Saving
Quit Without Saving(Y/N)? Y
SAVE to CMOS and Exit(Y/N)? Y
