manualshive.com logo in svg

MSI MS-5191, Руководство пользователя, Страница: 6 / 63

Поделиться
Скачать
MSI MS-5191 Скачать руководство пользователя страница 6

CHAPTER 2

HARDWARE INSTALLATION

2-1

CPU

CPU

Chapter 2

HARDWARE INSTALLATION

2.1  Central Processing Unit: CPU

The MICRO ATX AL14 mainboard operates with Intel

®

 Pentium

® 

processor

with MMX

TM 

technology,AMD

®

K6/K6-2/K6-III, and Cyrix

®

 6x86L/

6x86MX/MII processors.  It could operate with 2.0V to 1.3V processors.
The mainboard provides a 321-pin ZIF Socket 7 for easy CPU installation, a
DIP switch (SW1) to set the proper speed for the CPU and (JV1) for setting
the CPU voltage.  It is recommended that the processor should have a
cooling fan attached to prevent from overheating.

3.  Press the lever down to

complete the installation.

2. Locate Pin 1 in the socket

and look for the white dot or
cut edge in the CPU.  Match
Pin 1 with the white dot/cut
edge.  Then, insert the CPU.
It should insert easily.

Open Lever

Pin 1

Sliding
Plate

White dot/
Cut edge

Close
Lever

1. Pull the lever sideways away

from the socket.  Then, raise
the lever up to a 90-degree
angle.

2.1-1 CPU Installation Procedure

Содержание MS-5191
































































Отзывы:

Нет отзывов