MSI Midas 400, Руководство пользователя

Страница: 62 / 69

Chapter 4
4-16
[Power Off] The power button functions as normal power off button.
[Suspend] W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Run VGABIOS if S3 Resume
W hen Sleep Slate is set to S3 or S1&S3, users can select the options in this field.
Selecting [Yes] allows BIOS to call VGABIOS to initializet he VGA card when system
wakes up (resumes) from S3 sleep state. The system resume time is shortened
when you disable the function, but system will need an AGP driver to initialize the
VGA card. Therefore, if the AGP driver of the card does not support the initialization
feature, the display may work abnormally or not function after resuming form S3.
Options: [Auto], [Yes], [No].
After AC Power Lost
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the status before power faiure
interrupt occurred.
IRQ/Event Activity Detect
Press <Enter> and the following sub-menu appears:
PS2KB Wakeup Select
The item specifies how the system will be awakened from power saving mode
when input signal of the PS2 keyboard is detected. U se the <PageUp> &
<PageDown> keys to select the options. W hen selecting [Password], enter the
desired password. Setting options:
[Password], [Hot Key].
PS2KB Resume from S3
The item specifies how the system will be awakened from power saving mode
when input signal of the keyboard is detected. Setting options:
[Disabled],
[Enabled].
PS2M S Resume from S3
This setting determines whether the system will be awakened from power
saving modes when input signal of the PS/2 mouse is detected. Setting options:
[Disabled], [Enabled].