Chapter 3
3-22
Resume by Alarm
This function is for setting date and time for your computer to boot up. During
Disabled
, you cannot use this function. During Enabled, choose the Date and
Time Alarm:
Date (of month) Alarm
You can choose which month the system
will boot up. Set to 0, to boot every day.
Time (hh:mm:ss) Alarm
You can choose what hour, minute and
second the system will boot up.
Note: If you have change the setting, you must let the system boot up
until it goes to the operating system, before this function will work.
Reload Timer Events
Press <Enter> to enter the sub-menu and the following screen appears:
Primary/Secondary IDE 0/1, FDD/COM/LPT Port, PCI PIRQ [A-D]
Global Timer Events are I/O events whose occurrence can prevent the
system from entering a power saving mode or can awaken the system
from such a mode. In effect, the system remains alert for anything which
occurs to a device that is configured as
Enabled
, even when the system
is in a power down mode. Setting options:
Disabled, Enabled
.
Power Status LED
This item configures how the system uses power LED on the case to indicate
the sleep state. Available options are:
Single
The power LED blinks to indicate the sleep state without chang-
ing its color.
Dual
The power LED changes its color to indicate the sleep state.
