11
Chapter 3. Driver & Utility Installation
Connect MEGA STICK 511 to Your Computer
1.
Remove the USB connector cap.
2.
Plug one end of the supplied USB cable to your computer, and plug the
other end to MEGA STICK 511.
3.
After MEGA STICK 511 is connected to the computer, press the Power
button. Then MEGA STICK 511 should be detected by operating system.
Note: If the operation system of your computer is Windows 98SE, a
hardware driver for MEGA STICK 511 will be required.
Hardware Installation for Windows 98SE
When
MEGA STICK 511
is connected to a computer with Windows 98SE
operating system, the system will automatically detect the new hardware, and
ask for a driver. To install the driver, place the supplied driver disk into the CD
drive. Then, follow the on-screen instructions to complete the installation.