30
31
After adding new audio files, the attribute setup interface is as the following
picture:
4.3.6 Voice shortage, insert voice
It is defaulted to tick off this option. For better voice effect, please use the default
setup.
4.3.7 Other settings
4.3.7.1 "Overlay file" is to replace the same name AMV files at the specified
saving position automatically by the creating AMV files. The option is defaulted
to tick off. If the option is not selected, the created AMV files are already exit. It
says error while converting.
4.3.7.2 "Play after converting" is to auto-run the AMV Player and play the AMV
file after converting. The option is defaulted to tick off. If the option is not
selected, it will not play the AMV file automatically. You have to open the AMV
Player manually.
4.3.7.3 "Try other decoders" means that if there is no corresponding decoder to
the media files, the convert tool will try to use other decoders. The option is
defaulted not tick off. The suffix of the files can be revised at the same time since
the corresponding file suffixes correspond the corresponding decoders.
It is recommended to keep the default of the tool in the setup of "other settings".
Click "OK" button after finishing the above steps to save the settings.
Note: as to the above settings of system parameters, it only applies to the
selected media files while converting. The media files which did not been
BASIC FUNCTION
BASIC FUNCTION
