background image

Preface

v

iv

Safety Instructions

 

Read the safety instructions carefully and thoroughly�

 

All cautions and warnings on the device or user’s manual should be noted�

 

Refer servicing to qualified personnel only.

Keep the User’s Guide that comes with the package for future reference�

To prevent fire or shock hazard, keep this device away from humidity and high 

temperature�

Lay this device on a reliable flat surface before setting it up.

 

Make sure that the power voltage is within its safety range and has been 

adjusted properly to the value of 100~240V before connecting the device to 

the power outlet� Do not disable the protective earth pin from the plug� The 

device must be connected to an earthed mains socket-outlet�

 

Always disconnect the power cord or switch the wall socket off if the device 

would be left unused for a certain time to achieve zero energy consumption.

The ventilator on the device is used for air convection and to prevent the device 

from overheating� Do not cover the ventilator�

Do not leave the device in an unconditioned environment with a storage 

temperature above 60

O

C or below -20

O

C, which may damage the device�

NOTE: The maximum operating temperature is around 40

O

C�

When cleaning the device, be sure to remove the power plug� Use a piece of soft 

cloth rather than industrial chemical to clean the device� Never pour any liquid 

into the opening; that could damage the device or cause electric shock�

Содержание MAG251RX
































Отзывы: