3-26
MS-7135 ATX Mainboard
Setting options:
[Disabled]
Disable Dynamic Overclocking function.
[Private]
1st level of overclocking, increasing the CPU frequency by 1%.
[Sergeant]
2nd level of overclocking, increasing the CPU frequency by 3%.
[Captain]
3rd level of overclocking, increasing the CPU frequency by 5%.
[Colonel]
4th level of overclocking, increasing the CPU frequency by 7%.
[General]
5th level of overclocking, increasing the CPU frequency by 9%.
[Commander]
6th level of overclocking, increasing the CPU frequency by 11%.
Adjust CPU FSB Frequency
This item allows you to select the CPU Front Side Bus clock frequency (in MHz).
Select the number between [200]~[400] for needed frequency.
HT Frequency
This setting specifies the maximum operating frequency of the link
’
s transmitter clock.
Setting options: [1x], [1.5x], [2x], [2.5x], [3x], [4x], [5x].
HT Width
This field allows you to set the HT W idth between CPU & Chip
.↑
mark means Chip to
CPU HT Width. And
↓
mark means CPU to Chip HT W idth. Setting options: [
↓
8
↑
8],
[
↓
16
↑
8], [
↓
8
↑
16], [
↓
16
↑
16].
CPU Spread Spectrum
This setting is used to enable or disable the CPU Spread Spectrum feature. W hen
overclocking the CPU, always set it to [Disabled]. Setting options: [Center Spread],
[Disabled].
SATA Spread Spectrum
This setting is used to enable or disable the SATA Spread Spectrum feature. Setting
options: [Disabled], [Down Spread].
PCIE Spread Spectrum
This setting is used to enable or disable the CPU Spread Spectrum feature. W hen
MSI Reminds You...
1. Even though the Dynamic Overclocking Technology is more stable
than manual overclocking, basically, it is still risky. We suggest
that users should make sure that the CPU can afford to overclocking
regularly first. If you find the PC appears to be unstable or reboot
incidentally, it's better to disable the Dynamic Overclocking or to
lower the level of overclocking options. By the way, if you need to
conduct overclocking manually, you also need to disable the
Dy-
namic Overclocking
first.
2. When overclocking, it is NOT recommended to use SATA devices.
