AWARD
®
BIOS Setup
3-29
To clear a set password, just press <Enter> when you are prompted to enter the
password. A message will show up confirming the password will be disabled.
Once the password is disabled, the system will boot and you can enter Setup
without entering any password.
When a password has been set, you will be prompted to enter it every time
you try to enter Setup. This prevents an unauthorized person from changing
any part of your system configuration.
Additionally, when a password is enabled, you can also have BIOS to request
a password each time the system is booted. This would prevent unauthorized
use of your computer. The setting to determine when the password prompt is
required is the Security Option in the Advanced BIOS Features menu. If the
Security Option is set to
System
, the password is required both at boot and at
entry to Setup. If set to
Setup
, password prompt only occurs when trying to
enter Setup.
About Supervisor Password & User Password:
Supervisor password : Can enter and change the settings of
the setup menu.
User password:
Can only enter but do not have the right
to change the settings of the setup menu.
Set Supervisor/User Password
When you select this function, a message as below will appear on the screen:
Type the password, up to eight characters in length, and press <Enter>. The
password typed now will replace any previously set password from CMOS
memory. You will be prompted to confirm the password. Re-type the password
and press <Enter>. You may also press <Esc> to abort the selection and not
enter a password.
Содержание K7D Master-L
Страница 96: ...Appendix B B 8 3 Click Next 4 Click Next 6 Click Finish 5 Click Next ...
Страница 98: ...Appendix B B 10 10 Click Next 12 Click Finish 11 Click Next ...
Страница 100: ...Appendix B B 12 18 Click Finish 16 Click Next to continue 17 Click Next to continue ...
Страница 105: ...USB 2 0 Controller Card B 17 5 Click Finish 4 Click Next ...
