Chapter 3
3-22
- Date (of Month) Alarm
You can choose which month the system will boot up. Setting [0] will allow
you to boot the system every day.
- Time (hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note:
If you have change the setting, you must let the system boot up
until it goes to the operating system, before this function will work.
Reload Global Time Events
IRQ3~IRQ15
Enables or disables the monitoring of the specified IRQ line. If set to
Enabled
, the activity of the specified IRQ line will prevent the system from
entering power saving modes or awaken it from power saving modes.
Settings are:
Enabled
and
Disabled
.
Note
: IRQ (Interrupt Request) lines are system resources allocated
to I/O devices. When an I/O device needs to gain attention of the
operating system, it signals this by causing an IRQ to occur. After
receiving the signal, when the operating system is ready, the system
will interrupt itself and perform the service required by the I/O
device.
Содержание K7D Master-L
Страница 96: ...Appendix B B 8 3 Click Next 4 Click Next 6 Click Finish 5 Click Next ...
Страница 98: ...Appendix B B 10 10 Click Next 12 Click Finish 11 Click Next ...
Страница 100: ...Appendix B B 12 18 Click Finish 16 Click Next to continue 17 Click Next to continue ...
Страница 105: ...USB 2 0 Controller Card B 17 5 Click Finish 4 Click Next ...